User Guide of iMoveGo

Step 1:Launch iMoveGo on Your PC

Install iMoveGo on your computer and launch the software after it has been installed.

Step 2:Connect Your iOS Device

Option1: Connect your iPhone/iPad to your computer using a USB cable. Unlock your iOS device and click "Trust". You will need to enter your device's password to complete this step.

Option2: Connect your iPhone/iPad to your computer via Wifi. After successfully connecting the device via USB cable for the first time, you can directly choose to connect your iOS device to the computer under the same WiFi network next time.

Attention:
1. The iOS device and the computer should be connected to the same WiFi.
2. Android devices are not supported.
3 Always keep your iPhone/iPad/iPod touch screen on when connecting to WiFi.(how to keep iOS screen always on)

Step 3: Select Teleport Mode

The map will start to load; wait until it has completely loaded. Click on the Teleport Mode option which can be found in the upper right corner of the screen. It will be the fourth option that is given to you.

Step 4: Select Desired Location

Choose the location that you want to change to. When you have selected it, click on the "Move" option that will be displayed. You can zoom in and out of the map and find the location manually, or you can use the search bar and enter the name of the location you want to change to.

Step 1: Choose Two-Spot Mode

To customize a route, you can select Two-Spot Mode in the upper right corner (the second one).

Step 2: Plan Two-Spot Route

Select a location on the map as your destination, which will be added to the sidebar. Additionally, you can enter an address or coordinates to choose a destination. You can see the name and coordinates of your current location and the place you intend to go.

Next, you can set up the number of times for the virtual route to move back and forth between the two places. To customize your moving speed, drag the Speed bar.

GPS on iOS devices moves without lag as it moves on the map. When it's finished, a prompt will appear: Completed!

Step 1: Choose Multi-Spot Mode

To customize a route, you can select Multi-Spot Mode in the upper right corner (the third one).

Step 2: Plan Multi-Spot Route

On the map, pick different spots that you want to pass by one by one. You can also put in addresses or GPS coordinates. Enter the number to set round trip times. You can also drag the Speed bar to adjust the speed. After the Times and Speed are set, click "Move" to start the movement.

Now you can simulate your movement along the route and enjoy all location-based AR games without any walking! When it's finished, a prompt will appear: Completed!

Whether you're using Multi-Spot or Two-Spot mode, the joystick lets you move between points easily. In addition, the joystick enables you to adjust directions in real-time.

1. Under Joystick Mode (the first option), one click to Move automatically.

2. Follow the steps below to change direction:

-Click on the Left or Right arrow on the screen
-Press the A or D / Left or Right on the keyboard
-Drag the spot around the circle

3. Follow the steps below to control movement:

-Click on the Up or Down arrow on the screen
-Press the W or S / Up or Down on the keyboard

By importing a GPX file, we can quickly exchange GPX location data. Here are the steps to import and export GPX files.

Import GPX files:
If you have a GPX file from your friend or downloaded from online, you can import it into iMoveGo. On the main screen, click on the 1st option in the bottom right corner, which is the "Import" option. Then all you need to do is wait until the process has finished.

Export GPX files:
You will see the "Export" button on the upper right icon after using the Two-Spot Mode or Multi-Spot Mode. Click the "Export" button to save the route as a GPX file.

Feature 1: Circle Route

Under Multi-Spot Mode, when the starting point and the end point are nearby, iMoveGo will ask if you need to create a circle route. Choosing "Yes" aligns the beginning and end points; selecting "No" keeps the end point at its exact location.

Feature 2: Realistic Mode

In Realistic Mode, the moving speed will randomly fluctuate between the upper and lower 30% of the selected speed range. The speed varies every 5 seconds.

Feature 3: Returns or Loops

When the times are greater than 1, the user can choose to return to the original road (from start to finish, then return), or loop (from start to finish, from start to finish again) in the form of a repeat route.

Feature 4: Collect Route

You can click on the "Star" icon to collect a Multi-Spot or Two-Spot route planned by you.
The collected routes will be shown in the "Saved Routes" panel. This feature allows you to retain the starting point and end point of your route, as well as save time and labels.

Feature 5: Supports 10 iOS Devices

iMoveGo allows you to change the GPS location of 10 iOS devices at the same time.

Click on the "phone" icon on the right and it will show the connected device. Then click the "plus" sign in the upper right corner.

Choose the iOS device that you want to change the GPS location of.

Once you have trusted the computer, you can turn off any device or turn them all off at any time by selecting "Disconnect All".

Feature 6: Fluctuation Mode

In the teleport mode, you can check the wave mode. After checking, the virtual positioning point will fluctuate back and forth within a few meters of the center of the selected position.

Feature 7: Cooling Timer Function

When you want to use the teleport mode to modify the position with one key, you can turn on the cooling button in the lower right corner of the product interface, and the cooling timer will appear at this time.

Feature 8: Map Collection - PokéStop & Gym

When you want to use the teleport mode to modify the position with one key, you can turn on the cooling button in the lower right corner of the product interface, and the cooling timer will appear at this time.